SM2

The SM2

The SM2 is a STEREO DISCRETE Summing module, with selectable summing inputs (on the PC board with jumpers) so you can grab any pair of busses and use the SM2 as the summing master for the Stereo bus, Surround Bus or the Solo Bus, etc.

The two 8 seg LED VU meters follows the outputs of the both final stages.  The Summing inputs use the Tonelux DISCRETE op-amp for summing, then feeds the Tonelux DISCRETE output op-amp into a transformer for the summing (or ACA) outputs.  The return from the ACA out comes back into a DISCRETE booster amp, the master fader and transformer for the final output stages. 

This configuration allows you to insert a Stereo compressor after the summing amp and before the master fader (either the front panel pot or the external fader option, to be used with a passive external fader of the Tonelux ShadowMix automation system), then returning it back into the fader and to the final Booster outputs.  This modules works the same way any typical professional recording console would work.

The INS (insert) button allows the engineer to compare or insert the device such as a compressor for IN/OUT comparison or when required for a special CUE point.  One switch controls both channels.

The rear panel connector allows the user to insert a Stereo fader, which will serve as the Master fader.

Both the ACA outputs and the BOOSTER outputs are transformer coupled.

Click for more info and technical specs.


SM1 SM2 FD1 CR2 TB FX2+
MP1A
MIC Pre
EQ4P
EQ
MX2
Mixer
MX5.1
5.1 Mixer
AUX1
Access Bus
FX2
Dual Mono In
SM1
Mono Master
SM2
Stereo Master
100mm
Fader
CR2
Control Room Monitor
TB1
Talkback Module
FX2+ Dual Mono in
Plus MSTR
LFE TR8 TR8+ TXC VU vrack rear
LFE
Filter Module
TR8
Bus Assign
TR8+
Bus Assign
TXC Compressor VU Meter Shadowmix
Fader Automation
The Vrack
The Sixteen Slot Chasis for the VRack Series

Click here to create your custom Tonelux VRack with the CONFIGULIZER(Flash Required)